Single row angular contact bearing without cage, Single row angular contact bearing without cages, Manufacturer, Supplier-NINGBO CIE INDUSTRY AND TRADE CO.,LTD

/ We will do attentively..

Collection / Supposes / E-mail / Site map

Warm congratulation NINGBO CIE INDUSTRY AND TRADE CO.,LTD website clear~

Product List

Auto Bearings

		Front Wheel Hub Bearings
		Rear Wheel Hub Bearings
		Tensioner&Idler Bearings
		Clutch Release Bearings
		Wheel Hub Bearing(One Generation)
		Wheel Hub Bearing( second generation)
		Wheel Hub Bearing ABS System
		Water Pump Bearing
		Automotive Tapered Roller Bearings
		Steering Wheel Bearings
		Universal Joint Kits
		Automobile Center Support Bearing
		Steering Gear Box Bearings
		Special Non Standard Auto Bearing
		Automobile Alternator Bearing
		Automotive Air Condition Bearings

Industry Bearing

		Deep Groove Ball Bearings
		Angular Contact Ball Bearing
		Cylindrical Roller Bearings
		Self-Aligning Ball Bearing
		Spherical Roller Bearings
		Tapered Roller Bearings
		Bearing Units
		Thrust Bearings
		Needle Roller Bearings
		Linear Bearings
		Special Non Standard bearings

Power Transmission Parts

		Ball leading Screw
		Linear Motion Shaft
		Linear Guide Rail and Block Assemblies
		Precise Crossing Guide Rail

Auto Steering Gears

		Worm and level Steering Gears
		Rack and Pinion Type Steering Gears
		Recirculating Ball Type Steering Gears

Industry News

Ballscrew takes to the sky

Federal-mogul blacksburg layoffs continue...MORE

Current Location: Home >> Products >> Industry Bearing >> Angular Contact Ball Bearing >> Single row angular contact bearing without cages

Products

Single row angular contact bearing without cages

The design of inch angular contact ball bearings conforms to that of the metric standard bearings with the exception of the contact angle, which is only 20° instead of 40° for the metric bearings. Due to this design feature, inch bearings cannot support the same heavy axial loads as similarly sized metric bearings, but can operate at higher speeds.

The assortment of CIE inch angular contact ball bearings comprises some popular bearings in ALS and AMS series for shaft diameters from 7/8 to 5 inches.

Cages
Depending on the size, CIE inch single row angular contact ball bearings are equipped as standard with one of the following cages: Injection.

moulded window-type cage of glass fibre reinforced polyamide 66, ball centred, designation suffix P (P1)
Machined window-type brass cage, ball centred, designation suffix M (P2)

Tolerances and internal clearance
Inch bearings are manufactured to Normal tolerances, according to Standard BS 292:Part 2:1982.

The internal clearance in single row angular contact ball bearings is only obtained after mounting and is dependent on adjustment against a second bearing, which provides axial location in the opposite direction.

Specification		Boundary dimensions(mm)			Approx..Mass(kg)
C	AC	d	D	B	Approx..Mass(kg)
7005	AC	25	47	12	0.089
7205	AC	25	52	15	0.143
7305	AC	25	62	17	0.235
7006	AC	30	55	13	0.134
7206	AC	30	62	16	0.222
7306	AC	30	72	19	0.346
7007	AC	35	62	14	0.173
7207	AC	35	72	17	0.320
7307	AC	35	80	21	0.464
7008	AC	40	68	15	0.212
7208	AC	40	80	18	0.418
7308	AC	40	90	23	0.633
7009	AC	45	75	16	0.269
7209	AC	45	85	19	0.468
7309	AC	45	100	25	0.848
7010	AC	50	80	16	0.293
7210	AC	50	90	20	0.528
7310	AC	50	110	27	1.100
7011	AC	55	90	18	0.430
7211	AC	55	100	21	0.688
7311	AC	55	120	29	1.410
7012	AC	60	95	18	0.460
7212	AC	60	110	22	0.889
7312	AC	60	130	31	1.740
7013	AC	65	100	18	0.493
7213	AC	65	120	23	1.140
7313	AC	65	140	33	2.120
7014	AC	70	110	20	0.688
7214	AC	70	125	24	1.240
7314	AC	70	150	35	2.600
7015	AC	75	115	20	0.748
7215	AC	75	130	25	1.360
7315	AC	75	160	37	3.130
7016	AC	80	125	22	0.971
7216	AC	80	140	26	1.640
7316	AC	80	170	39	3.720
7017	AC	85	130	22	1.020
7217	AC	85	150	28	2.040
7317	AC	85	180	41	4.330
7018	AC	90	140	24	1.340
7218	AC	90	160	30	2.510
7318	AC	90	190	43	5.070
7019	AC	95	145	24	1.420
7219	AC	95	170	32	3.050
7319	AC	95	200	45	5.850
7020	AC	100	150	24	1.460
7220	AC	100	180	34	3.650
7320	AC	100	215	47	7.310
7021	AC	105	160	26	1.820
7221	AC	105	190	36	4.330
7022	AC	110	170	28	2.260
7222	AC	110	200	38	5.100
7322	AC	110	240	50	11.100
7024	AC	120	180	28	2.450
7224	AC	120	215	40	6.220
7324	AC	120	260	55	14.500

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads,any design of idea on it.

Welcome to keep in contact us.

Angular Contact Ball Bearing

Angular contact bearing with separable outer rings

High speed series angular contact bearings

Angular contact bearing with counter bore on inner rings

Single row angular contact bearing without cages

Angular contact bearing with separable inner rings

Four point contact angular contact bearing

Double row angular contact bearing

Double row angular contact ball bearing with two-piece inner ring

Matched pair angular contact ball bearings with spherical housing washer

Other related category:	Auto Bearings, Power Transmission Parts, Auto Steering Gears
Relative Product :	Deep Groove Ball Bearings , Angular Contact Ball Bearing , Cylindrical Roller Bearings , Self-Aligning Ball Bearing , Spherical Roller Bearings , Tapered Roller Bearings , Bearing Units , Thrust Bearings , Needle Roller Bearings , Linear Bearings , Special Non Standard Bearings

Workshop | Products | Contact