/ We will do attentively..   Collection / Supposes / E-mail / Site map
Warm congratulation NINGBO CIE INDUSTRY AND TRADE CO.,LTD website clear~
 Product List

Auto Bearings


Front Wheel Hub Bearings
  Rear Wheel Hub Bearings
 

Tensioner&Idler Bearings

 

Clutch Release Bearings

 

Wheel Hub Bearing(One Generation)

 

Wheel Hub Bearing( second generation)

 

Wheel Hub Bearing ABS System

 

Water Pump Bearing

 

Automotive Tapered Roller Bearings

 

Steering Wheel Bearings

 

Universal Joint Kits

    Automobile Center Support Bearing
  Steering Gear Box Bearings
  Special Non Standard Auto Bearing
  Automobile Alternator Bearing
  Automotive Air Condition Bearings

Industry Bearing


Deep Groove Ball Bearings
  Angular Contact Ball Bearing
 

Cylindrical Roller Bearings

 

Self-Aligning Ball Bearing

 

Spherical Roller Bearings

 

Tapered Roller Bearings

 

Bearing Units

 

Thrust Bearings

 

Needle Roller Bearings

 

Linear Bearings

 

Special Non Standard bearings

Power Transmission Parts


Ball leading Screw

 

Linear Motion Shaft

  Linear Guide Rail and Block Assemblies
  Precise Crossing Guide Rail

Auto Steering Gears


Worm and level Steering Gears

 

Rack and Pinion Type Steering Gears

 

Recirculating Ball Type Steering Gears


  Products

Recirculating Ball Type Steering Gears
 

Recirculating ballnut and worm assemblies steering gears

Introduction of Recirculating Ball Type Steering Gears

Recirculating-ball steering is used on many trucks and SUVs today. The linkage that turns the wheels is slightly different than on a rack-and-pinion system...

Steering nuts and worm shaft assembly

The ball screw assembly  steering gears consists of a screw and a nut, each with matching helical grooves, and balls which roll between these grooves between the nut and the screw when the nut or screw is rotating. The balls are deflected by the deflector into the ball return system of the nut and they travel through the return system to the opposite end of the ball nut in a continuous path, and exit from the ball return system into the ball screw and nut thread raceways continuously to recirculate in a closed circuit...


Sector pitman shaft
A Pitman shaft is a column extending from the steering sector, which attaches to the Pitman arm, which moves the tie rods. Depending on the turn direction, the fluid from a pump moves a piston forward or backward. This action moves a nut, which turns the Pitman shaft and steering linkage. The movement inside the steering box causes the Pitman shaft and arm to rotate, applying leverage to the relay rod, which passes the movement to the tie rods...

Pitman arm series
pitman arm to help steering systems on lifted vehicles.The arm helps correct the vehicle's important bump steer angle caused by an increase in suspension height. Not for use with stock steering stabilizer....

Steering linkage
Steering Linkage mechanism consisting of a system of rods and levers connected to the front wheels of a motor vehicle; the steering gear pushes it left or right which swivels the front wheels, causing the vehicle to turn ...

Steering joint
1.excellent performance, long using life and competitive price.
2.Your sample request are welcomed
3.With own R&D dept., OEM orders are available....

Steering bushing, seals and parts
auto bearing & ball bearing

Other related category: Auto Bearings,  Industry Bearing,  Power Transmission Parts
Relative Product : Worm And Level Steering Gears , Rack And Pinion Type Steering Gears , Recirculating Ball Type Steering Gears

Workshop | Products | Contact  
Copyright © NINGBO CIE INDUSTRY AND TRADE CO.,LTD. All Rights Reserved. Design By HiSupplier Online Inc.