/ We will do attentively..   Collection / Supposes / E-mail / Site map
Warm congratulation NINGBO CIE INDUSTRY AND TRADE CO.,LTD website clear~
 Product List

Auto Bearings


Front Wheel Hub Bearings
  Rear Wheel Hub Bearings
 

Tensioner&Idler Bearings

 

Clutch Release Bearings

 

Wheel Hub Bearing(One Generation)

 

Wheel Hub Bearing( second generation)

 

Wheel Hub Bearing ABS System

 

Water Pump Bearing

 

Automotive Tapered Roller Bearings

 

Steering Wheel Bearings

 

Universal Joint Kits

    Automobile Center Support Bearing
  Steering Gear Box Bearings
  Special Non Standard Auto Bearing
  Automobile Alternator Bearing
  Automotive Air Condition Bearings

Industry Bearing


Deep Groove Ball Bearings
  Angular Contact Ball Bearing
 

Cylindrical Roller Bearings

 

Self-Aligning Ball Bearing

 

Spherical Roller Bearings

 

Tapered Roller Bearings

 

Bearing Units

 

Thrust Bearings

 

Needle Roller Bearings

 

Linear Bearings

 

Special Non Standard bearings

Power Transmission Parts


Ball leading Screw

 

Linear Motion Shaft

  Linear Guide Rail and Block Assemblies
  Precise Crossing Guide Rail

Auto Steering Gears


Worm and level Steering Gears

 

Rack and Pinion Type Steering Gears

 

Recirculating Ball Type Steering Gears


  Products

Pitman arm series
 
Relative Products: Manual Steering Pitman Arm , Hydraulic Steering pitman arm , Power Steering Gear Pitman Shaft Arm
Pitman arm series
 

pitman arm to help steering systems on lifted vehicles.The arm helps correct the vehicle's important bump steer angle caused by an increase in suspension height. Not for use with stock steering stabilizer.

Dropped pitman arms are necessary in many of our kits, to correct steering geometry after the installation of a suspension system. Fabtech manufacture their pitman arms to be stronger then stock units, using the latest forging and CNC machining technology.
The pitman arm transfers steering mechanism motion to the steering linkage  The pitman arm is splined to the steering mechanisms output shaft (pitman arm shaft). A large nut and lock washer secure the pitman arm to the output shaft. The outer end of the pitman arm normally uses a ball-and-socket joint to connect to the center link

Pitman arm series Pitman arm series Auto Steering Gears
     

Pitman Arm
Use a tie-rod puller to separate the pitman arm from the steering linkage. You could remove the pitman arm from the splined sector shaft beneath steering box instead (using a pitman arm puller), but this may be easier to accomplish with the steering box removed from the vehicle and secured in a large vise. In either case, soaking the splines with penetrating oil several days ahead of time will greatly ease pitman arm removal. Once the pitman arm is removed, it will need to be reinstalled on the new steering box and torqued to factory specifications. Some steering box sector shafts have a "key spline" to ensure that the pitman arm can only be installed in the proper position. If your steering box does not have this feature, you'll have to count the number of input shaft turns from lock to lock, then rotate the sector shaft to the halfway point prior to attaching the pitman arm in the perfectly centered position.

Pitman arm Auto Steering Gears Pitman arm series

forged design. Extra strong, wide design. Ideal for use with crossover steering. Same drop as factory pitman arm.
If there is any question on the Pitman Arm Series. Welcome to contact us in details.



Recirculating Ball Type Steering Gears
Recirculating ballnut and worm assemblies steering gears
Steering nuts and worm shaft assembly
Sector pitman shaft
Pitman arm series
Steering linkage
Steering joint
Steering bushing, seals and parts

Other related category: Auto Bearings,  Industry Bearing,  Power Transmission Parts
Relative Product : Worm And Level Steering Gears , Rack And Pinion Type Steering Gears , Recirculating Ball Type Steering Gears

Workshop | Products | Contact  
Copyright © NINGBO CIE INDUSTRY AND TRADE CO.,LTD. All Rights Reserved. Design By HiSupplier Online Inc.