The raceways of both the inner and outer rings of these non - separable bearings are made with set contact angles.  

Typical applications: speed reducers, construction equipment, automotive applications, pumps, printing presses, paper mill
machines

Single - row angular contact ball bearings can sustain radial, axial
and momentary loads. The balls are inserted
using counter - bore construction, which allows a larger number of balls
to be installed than in deep - groove ball bearings. However, any axial load must be applied in
one direction. For this reason, they are often used in pairs. Due to their design, angular contact bearings will
experience some amount of axial loading from any radial load that
is applied.
We provide various combinations with pre - adjusted clearance to
simplify assembly

BEARING NO

SIZE(dxDxT)

WEIGHT(kg)

 S718/8

 8×16×4

 0.0018

 S71892

 460×580×56

 36.4

 S718/600

 600×730×60

 60.7

 S718/1180

 1180×1420×106

 307

 S728/3X2

 3×7×2.5

 0.0004

 S728/5X3

 5×12×3.5

 -

 S728/6X2

 6×13×4

 0.0021

 S719/5J

 5×13×4

 0.0025

 S719/5

 5×13×4

 0.0023

 S719/6

 6×15×5

 0.0039

 S719/6TN

 6×15×5

 -

 S719/6TN3

 6×15×5

 0.0039

 S719/6X3

 6×16×8.5

 -

 S719/6/YA

 6×15×5

 0.0039

 S719/7

 7×17×5

 0.0057

 S719/8

 8×19×6

 0.085

 S71952Q1

 260×360×46

 12.9

 S729/8X2

 8×19×7

 0.01

 S707J

 7×19×6

 0.008

 S707

 7×19×6

 0.008

 S708

 8×22×7

 0.013

 S709

 9×24×7

 0.016

 S7000J

 10×26×8

 0.018

 S7000

 10×26×8

 0.018

 S7000/HN

 10×26×8

 -

 S7001J

 12×28×8

 0.017

 S7004J

 20×42×12

 0.065

 S78201J

 12×32×7

 0.029

 S78202J

 15×35×8

 0.035

 S723J

 3×10×4

 0.002

 S723/T

 3×10×4

 0.002

 S723

 3×10×4

 0.002

 S723C/P4

 3×10×4

 -

 S723/P4T37

 3×10×4

 0.0015

 S724J

 4×13×5

 0.003

 S724

 4×13×5

 0.003

 S725J

 5×16×5

 0.005

 S725

 5×16×5

 0.005

 S725TN/HV

 5×16×5

 -

 S725J/P6T

 5×16×5

 0.005

If there is any question on this angular contact bearing with separable inner rings. Welcome to contact us in details.